Projecteur de simulation Full HD professionnel (sans objectif)


Le projecteur de simulation DLA-VS2500 a été conçu pour fournir des résultats optimaux en matière de visualisation et de simulation, avec une résolution e-shift 4K et une image projetée de 5,1 mégapixels. Disponible avec (DLA-VS2500ZG) ou sans objectif (DLA-VS2500G), chaque modèle 2K intègre le système d'éclairage hybride au laser BLU-Escent pour offrir de meilleures performances au niveau du rapport de contraste natif et du suivi de gamma, ainsi qu'une durée de vie prolongée.


  • High contrast using D-ILA LCoS device
  • Angle-free installation,portrait mode available
  • Auto intensity mode
  • Hide function with light source minimum power
  • 1920 x 1080 native resolution
  • 3 active matrix 0.7" digital D-ILA devices
  • 30,000:1 contrast ratio (typical),20,000:1(minimum)
  • Digital smear reduction via black-frame insertion
  • 1200 ANSI lumens (typical),1000 ANSI lumens (minimum)
  • 12-bit gamma correction
  • Long-life light source (20,000+ hours) for lower total cost of ownership
  • Infrared spectrum for NVG generated by the phosphor
  • 7-axis colour management system
  • 16-step lens aperture control
  • Long-life wiregrid polarisers
  • Long-life inorganic optical components
  • Wide-range zoom lens, 1.4-2.8:1 throw ratio, ±80% vertical off set,±34% horizontal off set
  • Flexible orientation - unlimited pitch & roll
  • 11x11 matrix, 1/16 pixel micro-convergence control
  • Comprehensive LAN/RS232 control protocol
  • 3840 x 2160 e-shift 4K
  • Not for regular 4K input sources, only for dedicate Simulation IG´s
  • BLU-Escent Laser/Phosphor Light source
Voir détails
Spécifications techniques

DLA-VS2500ZG - Projecteur de simulation Full HD professionnel (sans objectif)

Safety and Environmental Impact
Moving from a lamp-based projector to a solid state light source means that there is no longer the mercury in the lamp to worry about, eliminating any disposal concerns.
Since the projector contains a laser source, JVC has taken special care to be sure no laser light can escape the projector housing. This is facilitated by the strong die-cast block that holds the blues lasers. This is good for thermal management and allows the projector to have a Class II laser classification. This means you follow the same safety considerations as you would with a lamp based projector.
Flexible Mounting Orientations
Compared with conventional lamp projectors with a tilt angle limitation, BLU-Escent projectors have no limitations on orientation or tilt angle. They can be installed at any orientation through 360-degrees and even vertically, which is ideal for helicopter simulators which require higher vertical resolution. The rotation of the phosphor wheel remains unaffected regardless of the install angle.
Very High Contrast and Dynamic Range
The JVC BLU-Escent projectors offer very high contrast and dynamic range. For simulators, that can be the difference between usable and unusable. For example, one key application is landing in fog or low light levels where pilots key on seeing runways or other lights to aid in landing. If the contrast is not high enough, the pilots cannot distinguish the lights from the background, making it difficult to see the landing lights in a CAT III scenario, compromising the simulation. The high dynamic range allows the lights to punch through the fog, giving a realistic, calligraphic like image.
For nighttime or night vision goggle (NVG) operations, you must have a very low black level in your projector to provide decent contrast. And, for multi-projector applications, it is critical to have the same black level across the projectors.
The BLU-Escent DLA-VS2500 offers 1920 x 1080 resolution panels, but with JVC’s e-shift technology. This technology works by having the IG create optimized 1920 x 1080 A and B sub-frames from a 3840x2160 image buffer. The subframes are projected sequentially, optically shifted ½ pixel in both horizontal and vertical directions, alternating at a rate of 120Hz for 30Hz or 60Hz content. The viewer’s eyes blend the A & B subframes together to create an enhanced resolution image. This image gives less jaggy edges, round circles and circular light points and reduces anti-aliasing.
Image Devices
Projection Technology
Projection Device size
0,7 inch
Number of Projection Devices
Résolution native
1920 by 1080 Pixels
Electronic E-Shift Generation
Max Resolution
3840 by 2160 Pixels
Polarize Light Output
Light source technology
Laser / Posphor
Type of the Light source
Blu-Escent laser hybrid
Number of Light sources
1 unit
Expecting Lifetime regular mode
Expecting Lifetime save mode
~ 40000
Phosphor Wheel
Light and Contrast
Brightness Typical [1]
1200 ANSI Lumen
Brightness Minimum
1000 ANSI Lumens
Contrast Typical
30000 to 1
Contrast Minimum
18000 to 1
greater than 80%
by Lens see Lens data
Contrôle dynamique de la puissance lumineuse
Contrôle manuel de la puissance lumineuse
125 steps
Infrared capability for Night Vision Googles
Profondeur de couleur
10-bit Input, 10-bit Display and Signal Processing
Color Space
REC 709
Model Name
JVC Regular Lens
Zoom Lens
Lens included
Zoom Electrical or Mechanical
Electrical Zoom
Focus Electrical or Mechanical
Electrical Focus
Aperture ratio F:
3,2 to 4,3
Focal length f:
21,3mm to 42,6mm
Lens Ratio Factor
1,4:1 to 2,8:1
For Lens Type A:
JVC Regular Lens
A) Throw ratio:
1.4:1 to 2.8:1
A) Lens Shift Vertical
+/-80% motorized
A) Lens Shift Horizontal
+/-34% motorized
A) Projection distance Wide to End
1,78 m to 6,06m
A) Projection distance Tele to End
3,66m to 12,3m
A) Screen Size in inch diagonal
60 inch to 200 inch
Lens Aperture
16 Steps
Focus/Zoom Adjustment on internal Test Patterns
Focus/Zoom Adjustment on User Signal
Picture Mode Presets
Natural / Dynamic and 6 User settings
Color Temperature
5500K / 6500K / 9500K / High Bright / 3 User settings
Réglage Gamma
Std 2.2 Gamma and 3 User adjustable Gamma presets
Gamma Processing Depth
12 Bit
Manual Gamma Settings
E-Shift Control
ON/OFF/ Up-scaling
Management des couleurs
7-Axis adjustable CMS
Clear Motion Drive
OFF / Mode 1 / Mode 2 / Mode 3 / Mode 4
Pixel Adjustment Whole Screen
Pixel Adjustment Zone Screen
Auto Calibration
external optional Software Tool PK-CS1301 (optional cost)
Screen Mask
Off / 2.5% / 5% / Custom
Start up Logo
Input Channel Hide
HDMI1 / HDM2 / Off
General Hide Mode
Internal Test Patterns
Standby Timer
Off / 1 Hour / 2 Hours / 3 Hours and 4 Hours
Projector System Status Screen
Local Projector Control Buttons
Menu Position select
Black/Blue Screen select (in case of no Input source)
Input Signal
Input Signal Capability Special Notes:
Not for regular 4K input sources, only for dedicate Simulation IG´s, To drive the E-Shift for 4K Sources, the image generator need to create a special Odd/Even Frame format on Input A/B
HDMI Input Signal
HDMI1/HDMI2 480P/60 /576p/50/ 720p/60/50/ 1080P 50/60
DUAL Input: 1080p 50/60
PC Signal Form: 640x480
Input Level Adjustment
16 - 235 Video (fix range) 0 to 255 PC (fix range)
Color space range for inputs
YcbCr4444 / YCbCr422 / RGB
3D Format
Compatibilité 3D
3D Special Notes:
Passive Stereo with two Projectors (Polarized Filters needed)
Image Timing Data
Latency for Simulation or Video Lip sync in ms.
17.5ms w/1080p60 Input
Input Terminals
Oui, 2 x HDMI v1.4b (locking HDMI connectors)
RS-232C Terminal
LAN Terminal
IR Remote
Control Terminals
RS-232C Terminal
Oui, RS-232C: D-Sub 9 pin (male) x1
LAN Terminal
Oui, LAN: RJ45 x1
Wired Remote in
Stereo mini jack x1
IR Remote Receivers
2 Front/Back
Selection of IR codes
Power and Environment
Noise Level (0-26 degree)
<55dB (A) at 39.4”/1m (3.3ft)
100 - 240 V CA, 50/60 Hz
290 Watts
Power Standby
Operation Temperature
5°C to 35°C
Operation Humidity:(Non-Condensing)
20% to 80%
Storage Temperature
-10°C to 60°C
Installation Height
below 2000 Meters
Installation Angle
Free angle
W 455 x H 179 x D 472 mm
18,2 kg
Airflow requirement
1.6 m3 per minute minimum
Motion Platform usable
Yes please contact us for Force-Data
Include Package
Cord A
Cord B
IR Controller RM-MH13G is optional,
Safety Info Doc include for Full Instruction, please download form this web site
General Editing Note
General Note:
Images simulées.Les valeurs de poids et de dimensions sont approximatives.E.&O.E. Conception et spécifications sujettes à modification sans préavis.
[1] typical @High bright mode

Image of Calibration Software or Tools (PK-CS1301G)


Logiciels ou outils d'étalonnage


Produits Associés

Image of Professional full HD Visualization Projector (DLA-VS2300ZG)


Projecteur de simulation Full HD professionnel (avec objectif)


Image of Professional full HD Visualization Projector (DLA-VS2300G)


Projecteur de simulation Full HD professionnel (sans objectif)


Image of Professional full HD Visualization Projector (DLA-VS2500G)


Projecteur de simulation Full HD professionnel (sans objectif)


Image of Native 4K Visualization Projector (DLA-VS4500)


Projecteur 4K natif D-ILA


Image of Native 4K / 8K e-shift Visualization Projector (DLA-VS4700)


Projecteur de simulation e-shift 4K / 8K natif


Image of High-brightness 4K Visualization Series Projector (without lens) (DLA-SH7NL)


Projecteur de simulation 4K haute luminosité (sans objectif)


Image of High-brightness 4K Visualization Series Projector (DLA-VS4010)


High-brightness 4K Visualization Series Projector


Image of High-brightness native 4K / 8K e-shift Visualization Series Projector (without lens) (DLA-VS4800)


Projecteur de simulation e-shift 8K haute luminosité (sans objectif)


Image of 4K / 8K e-shift Visualization Series Projector (DLA-VS4810)


4K / 8K e-shift Visualization Series Projector